|
|
|
| Option |
Option Overview |
| M1 |
Factory configured for 115 VAC input (1 kW and 1.2 kW units only) |
| M9C |
Internal IEEE-488/RS-232 Interface (can only support 12-bit slaves) |
| M13 |
Locking shafts (front panel potentiometers) |
| M32 |
Master/slave paralleling cable configured for two units |
| M33 |
Replace input connector with terminal block (3 kW only) |
| M51A |
Isolated analog programming control of V/I/OVP and isolated V/I monitor outputs up to 500V relative to the supply’s return line. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems. |
| M85 |
12-bit slave interface option for use with M9 or M130 master (3 ft. control cable included) |
| M102 |
Front panel binding posts for 1 kW or 1.2 kW, Models ≤30A, ≤100V. Not compatible with M9C, M85, M130, M131, M133, M135, M136 |
| M130 |
LXI ™compliant 10/100 Base T Ethernet remote control master interface; includes web server for direct control of power supply via web browser (MS Internet Explorer 6.0 or later) |
| M131 |
16-bit slave interface option for use with a M130 master (3 ft. control cable included) |
| M133 |
Output disconnect and polarity reversal relays controlled via SCPI commands. Limited to 1kW or 1.2 kW, ≤100V, ≤60A |
| M135 |
M130 & M133 combination. Limited to 1kW or 1.2 kW, ≤100V, ≤60A |
| M136 |
M131 & M133 combination. Limited to 1kW or 1.2 kW, ≤100V, ≤60A 105-300-26: Rack slide kit (3 kW only) |
|
 |
|
|
|
|
|
|
|
|
