Xantrex :

Programmable Power Products

Elgar, Sorensen and Xantrex Products

LHP Series : Specifications

Output Voltage and Current

Model	Voltage	Current
LHP 7.5-130	0-7.5	0-130
LHP 20-50	0-20	0-50
LHP 33-33	0-33	0-33
LHP 40-25	0-40	0-25
LHP 60-18	0-60	0-18
LHP 100-10	0-100	0-10
LHP 150-7	0-150	0-7
LHP 300-3.5	0-300	0-3.5
LHP 600-1.7	0-600	0-1.7

Common

Operating Temperature	0 to 40°C
Storage Temperature	-40°C to 85°C
Humidity	0-80% RH, non condensing
Cooling	Forced air
Front Panel Control	10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution	0.02% of voltage maximum
Main Output	Nickel plated copper bus bars for models up to 40V. Wire clamp connector for models over 40V (30A max from front panel) Remote Start/Stop and Interlock: TTL compatible input, selectable logic
Meter Accuracy	1% of full scale + 1 count Adjustable OVP: OVP range 5% to 110% of V max
Remote Sense Voltage	5V maximum drop per line (3V/line for LHP 7.5-130). Line drop subtracts from the maximum available output voltage at full rated power.
Maximum Voltage	Differential (output to safety ground) 600 VDC
Transient Response (Voltage)	1 ms for output voltage to recover within 0.1% of previous level after step change in load current of up to 50% of rated output
Stability	0.05% of maximum voltage over 8 hours after 60 minute warm up time at fixed line, load and temperature
Efficiency	80% typical. Typical efficiency at 115 VAC input and rated output power.
Temperature Coefficient	See table on the next page. Change in output per °C change in ambient temperature, with constant line and load.
Regulatory Compliance	CE Mark

Physical

Dimensions	2U or 3.50” (88 mm) H x 8.45” (214 mm) Wt x 18.60” (472 mm) D
Weight	18 lbs. (8.2 kg)
Shipping Weight	20 lbs. (9 kg)

Input

Voltage and Frequency	85-250 VAC, 47-63 Hz
Connector	IEC 320 15A/250V
Current	13A max at 100 VAC, 11A max at 120 VAC, 6A max at 220 VAC
Power Factor	0.98 minimum for full load
Input Harmonic Distortion	Current harmonics meet IEC555-2 limits

Investigate our discount web specials

	Product Configurator

	DC Electronic Loads

	DC Modular Supply

	Discontinued Products

	Product Support

	Contact Sales

Noise and Ripple

Output Power

Line Regulation

Output Power

Load Regulation

Output Power

M5A: J-305 Pin Assignments

1	Overvoltage Protection Flag	14	Not Used
2	TTL Shutdown Return	15	TTL Shutdown
3	Not Used	16	Current Limit Program
4	Program Return	17	Voltage Program
5	Program Return	18	Current Readback
6	Auxiliary Ground	19	Voltage Readback
7	Remote Voltage Program Select	20	+10V Reference Out (10 mA max.)
8	Remote Current Program Select	21	Output Fail Flag
9	Voltage Current Limit Mode Indicator	22	+ Sense
10	+ Out	23	+ Out
11	+ Out	24	- Return
12	- Return	25	- Sense
13	- Return