AMETEK Programmable Power : California Instruments RP Series : Specifications

AC Power Sources

Elgar and California Instruments Power Products

California Instruments RP Series : Specifications

Note: Specifications shown are valid over an ambient temperature range of 25°±5°C.

Controller

Output

Model	801RP	1251RP	2001RP	2003RP
Phases	1	1	1	3 (A,B,C)
Phase Angles				A=0° B=240° C=120°
AC Power	800VA	1250VA	2000VA	675VA Max per phase
Load Connection Floating neutral	Rear panel terminal block	Rear panel terminal block	Rear panel terminal block / optional Universal front panel sockets	Rear panel terminal block


	Service Agreement for all California Instruments AC except MX & FCS

Output : Voltage

Model	801RP	1251RP	2001RP	2003RP
High range / Low Range	0-270 / 0-135 V (L-N)	0-270 / 0-135 V (L-N)	0-300 / 0-150 V RMS (except -AV and -LZ options)	0-270/0-135 V RMS
Accuracy	± 1 %FS @ 50/60 Hz	± 1 %FS @ 50/60 Hz	± 0.1 %FS @ 16Hz-100 Hz	± 0.1 %FS @ 16Hz-100 Hz
Accuracy	± 2 %FS @ 400 Hz	± 2 %FS @ 400 Hz	± 0.2%FS @ 100Hz-5000Hz	± 0.2%FS @ 100Hz-2000Hz
Resolution	0.1 V	0.1 V	0.1 V	0.1 V
Line & Load Regulation High V range	± 0.5 %FS	± 0.5 %FS
Line & Load Regulation Low V range	± 1 %FS	± 1 %FS
Load Regulation			remote sense ± 0.1% FS	remote sense, 16-500Hz ± 0.1 %FS²
Line Regulation 10 % Line change	± 0.1 %FS	± 0.1 %FS	± 0.02%FS	± 0.02%FS
T.H.D	0.5 typical % @ 50/60 Hz	0.5 typical % @ 50/60 Hz	16-100Hz 0.5 typ./1.0 max.% (into a resistive load)	16-100Hz 0.5 typ./1.0 max.% 100-2000Hz 1.0 typ./2.0 max.%
Output Noise	< 0.1 V typical	< 0.1 V typical	< 0.1 V RMS typ.	< 0.1 V RMS typ.

Note 2: Specifications apply over freq. ranges shown and above 5 % of V range.

Output : Frequency (specifications valid from 45 Hz to 500 Hz)

Output : Current

Model	801RP	1251RP	2001RP	2003RP
Steady State Current High V range	3.0 A rms	4.6 A rms	6.7 A rms	2.5 A rms
Steady State Current Low V range	6.0 A rms	9.2 A rms	13.4 A rms	5.0 A rms
Peak Current High V range	13.8 A peak	13.8 A peak	22.2 A peak	7.5 A peak
Peak Current Low V range	27.6 A peak	27.6 A peak	44.5 A peak	15.0 A peak

Protection

Model	801RP	1251RP	2001RP	2003RP
Current limit Mode	Programmable trip level : Output trips off	Programmable trip level : Output trips off	Const. Current or Const. Volt	Const. Current or Const. Volt
(Output shut off) Resolution	0.1 A rms	0.1 A rms	0.1 A rms	0.1 A rms
Over Temperature	Output shut off	Output shut off	Output shut off	Output shut off
Over Voltage	Output shut off	Output shut off	Output shut off	Output shut off

Input

Model	801RP	1251RP	2001RP	2003RP
Line Voltage¹ 2 wire + GND	100-240 V rms Maximum operating range 85 - 265 V rms	100-240 V rms Maximum operating range 85 - 265 V rms	107/115V or 208/230V ± 10% V RMS	107/115V or 208/230V ± 10% V RMS
Line Current (fused)	< 15 A rms	< 15 A rms	<35@96V, <30@115V, <15@230V A RMS	<30@115V,<15@230V A RMS
Line Frequency	47 - 63 Hz	47 - 63 Hz	47 - 440 Hz	47 - 440 Hz
Holdup Time	20 ms	20 ms	10 ms	10 ms
Power Factor	> 0.95 typical	> 0.95 typical
Isolation Input/output to Chassis	1350 V / 2200 V	1350 V / 2200 V	1350 V / 2200 V	1350 V / 2200 V

Measurements (* Requires Option -OP1)

Model	801RP	1251RP	2001RP	2003RP
Current Range (RMS steady state)	0.0 - 10.0 A rms Accuracy ± 0.2 A rms Resolution 0.1 A	0.0 - 10.0 A rms Accuracy ± 0.2 A rms Resolution 0.1 A	0.000-4.000 / 0.00-15.00 A RMS Accuracy 0.2 % FS + 0.3 % rdng Resolution 0.001 / 0.01 A RMS	0.000-4.000 / 0.00-6.00 A RMS Accuracy 0.2 % FS + 0.3 % rdng Resolution 0.001 / 0.01 A RMS
Peak Current*			Range Low/High 12.00 / 50.0A Accuracy 0.5% FS + 0.5% rdng Resolution 0.01 / 0.1A	Range Low/High 0.00-12.00/0.0-20.0 A Accuracy 0.5% FS + 0.5% rdng Resolution 0.01 / 0.1 A
Voltage*	Range 0 - 278 V Resolution 1 V (below 250 V)	Range 0 - 278 V Resolution 1 V (below 250 V)	Range 0 - 300 V RMS Accuracy 0.1% FS + 0.05% rdng Resolution 0.1 V RMS	Range 0-300.0 V RMS Accuracy 0.1% FS + 0.05% rdng Resolution 0.1 V RMS
Power*			Range Low/High 800 / 2000 W Accuracy 0.5 % FS Resolution 0.2 W	Range 0.0-800.0 W Accuracy 0.5 % FS Resolution 0.2 W
Power Factor*			Range 0.00 - 1.00 Resolution 0.01	Range 0.00 - 1.00 Resolution 0.01

Remote Control Options

Model	801RP	1251RP	2001RP	2003RP
Interface	option -IF RS232C and IEEE-488 IEEE-488 Address 0-31 IEEE Functions SH1, AH1, T8, L3, RL2, SRQ0, PP0 RS232C settings 9600,8,n,1 Command Language SCPI	option -IF RS232C and IEEE-488IEEE-488 Address 0-31 IEEE Functions SH1, AH1, T8, L3, RL2, SRQ0, PP0 RS232C settings 9600,8,n,1 Command Language SCPI	RS232C and IEEE-488 IEEE Functions SH1, AH1, T8, L3, RL2 RS232C settings 19200,8,n,1 Command Language SCPI (Requires Option -OP1)	RS232C and IEEE-488 IEEE Functions SH1, AH1, T8, L3, RL2 RS232C settings 19200,8,n,1 Command Language SCPI (Requires Option -OP1)
Remote Inhibit (Requires Option -OP1)			Output shut down TTL in, active low BNC	Output shut down TTL in, active low BNC
Function Strobe (Requires Option -OP1)			On V or F change TTL out, active low BNC	On V or F change TTL out, active low BNC

Physical