Refer
to the SmartWave Series for general
descriptions and specifications. The following specifications highlight
the differences and enhanced modes of operation.
Output
Voltage
Accuracy: ±0.1% of range. Add ±0.1% of full scale for "AC plus DC"
mode. Valid for 5 to 156 VRMS and 10 to 312 VRMS at 25°C, sense leads
connected, no load. Temperature coefficient less than 50 ppm/°C
Low
Impedance: (Ref: EN 61000-3-3, Annex A and IEC 725)
Low
Impedance Mode:
|
1750
VA 50 Hz
1 phase 312V range
|
3700
VA 50Hz
1 phase 312V range
|
5250
VA 50 Hz
1 phase 312V range
|
|
<(0.07
+ j0.05)Ohms
|
<(0.05
+ j0.04)Ohms
|
<(0.03
+ j0.03)Ohms
|
Standard
Reference Impedance Mode: (0.40+j0.25)Ohms ±3% at 50 Hz
Output
Frequency: DC or 40 to 500 Hz (SINE); 40-63 Hz (Complex WaveForms)
Interharmonic
WaveForm Generator: Ref: EN 61000-4-13
Frequency Range: 15-3000 Hz
Frequency Accuracy: 0.5% (of interharmonic signal)
Frequency Resolution:
15-60 Hz: 0.001 Hz
60-120 Hz: 0.002 Hz
120-240 Hz: 0.004 Hz
240-3000 Hz:
0.008 Hz
Voltage Range: 0-40.0 VRMS
Voltage Accuracy: ±0.23 VRMS
Voltage Resolution: 0.02 VRMS
|
