Xantrex Programmable Power
Programmable Power Products
Elgar, Sorensen and Xantrex Products
DC Products Bench Products AC Products Modular AC / DC Electronic Loads Custome Solutions
Overview Features Specifications Technical Diagrams Downloads Get a Quote  
XMP 2600 Series : Specifications

 

General Specifications

 

Operational AC Input Voltage

 

 

 

170 V – 265 V, 45 to 66 Hz

 

lin < 20 A nominal

 

Nominal 120 V, Power output < 1 kW

 

lin < 15 A nominal

 

Power cord length

 

2 m

 

Power Factor Correction (PFC)

 

Power factor correction to meet EN61000-3-2 Current Harmonics and EN61000-3-3 Voltage Fluctuations (IEC555)

 

Inrush current

 

Up to 100% of specified nominal current

 

Input mains protection

 

Circuit breaker switch on the front panel

 

Environmental Conditions

 

 

 

Storage temperature

 

-20oC to 70oC

 

Operating temperature

 

0oC to 55oC (LCD to 50oC)

 

Derate output current/power

 

1% per oC from 30oC to 55oC

 

Temperature Coefficient

 

 

 

Voltage Programming

 

0.01% per oC

 

Current Programming

 

0.02% per oC

 

Voltage Readback

 

0.01% per oC

 

Current Readback

 

0.02% per oC

 

Long Term Drift

 

Output change after 30 min. warm-up, over an interval of 8 hours under constant load, line and temperature conditions is 0.03%.

 

Remote Sensing

 

Up to 4 V can be dropped over the two load lines together (i.e. 1.5 V + 2.5 V). At 2.5 V a warning event will be generated, alerting over sense voltage drop condition, and at 4 V the module will be shut down. The load lines drop subtracts from the voltage available for the load.

 

Output Programming Response

 

Time rise and fall time with fall resistive load (10 to 90% and 90 to 10%) is 30-640 mSec.

 

Current

 

0.6% +/- 1 digit

 

Isolation

 

Output terminals can be floated up to +/- 240 VDC from chassis ground.

 

Dimensions without feet
(H x W x D)

 

5.25 x 19 x 22.5”/132.6 X 482.6 x 570.0 mm

 

Weight

 

 

 

XMP mainframe with controller

 

26.2 lb (11.9 kg)

 

1/8 width module

 

3.9 lb (1.75 kg)

 

2/8 width module

 

5.5 lb (2.5 kg)

 

3/8 width module

 

7.5 lb (3.4 kg)

 

Approvals

 

CE-marked units meet: EN61010-1, EN61326, EN61000-3-2, and EN61000-3-3; UL Listed to UL61010-1; Meets USA EMC Standard FCC Part 15B Class A

 

Note: Specifications subject to change without notice.

 


Investigate our discount web specials
  Product Configurator  
DC Electronic Loads
DC Modular Supply
Discontinued Products
Product Support
Contact Sales