|
Electrical Specifications |
|
Output Ratings: |
|
|
|
Output voltage |
|
0 - 42 V |
|
Output current |
|
0 - 10 A |
|
Outputs |
|
1 |
|
Output power |
|
420 W |
|
Operating mode |
|
Constant voltage or constant current with automatic cross-over and indication |
|
Voltage setting |
|
By coarse and fine controls |
|
Current setting |
|
By single logarithmic control |
|
Output impedance |
|
Typically <5mW in constant voltage mode. Typically >20kW in constant current mode. |
|
Line regulation |
|
<0.01% of max. output for a 10% line voltage change |
|
Load regulation |
|
<0.01% of max. output for a 90% load change |
|
Ripple and noise (20 MHz bandwidth) |
|
Typically <2 mV rms, <10 mV pk-pk |
|
Transient response |
|
<200ms to within 50 mV of set level for 90% load change |
|
Temperature coefficient |
|
Typically <100ppm/oC |
|
Output protection |
|
Outputs will withstand forward voltages up to 40 V |
|
Status indication |
|
Output ON lamps. Constant current mode lamps. |
|
Output switch |
|
Electronic. Preset voltage/current displayed with output off. |
|
Output terminals |
|
4mm terminals on 19mm (0.75") pitch. Special safety terminals on XPH 75-2. |
|
Meters (main outputs): |
|
|
|
Meter types |
|
Separate 3 digit meters for voltage and current with 14mm (0.56") LED displays. Reading rate 4/sec (4 digit voltmeter on XPH 75-2) |
|
Meter resolution |
|
100 mV, 10 mA |
|
Meter accuracy: |
|
|
|
Voltage |
|
0.3% +/- 1 digit |
|
Current |
|
0.6% +/- 1 digit |
|
XPH 42-10 Model |
|
Output protection |
|
As XPH series but with limits of 48 V. Over-temperature trip on XPH 42-10. |
|
Remote selection |
|
Switch selectable as Local or Remote |
|
Connection |
|
Remote sense connections via spring loaded connectors |
|
Meter types |
|
Separate 4 digit meters for voltage and current with 14mm (0.56") LED displays. Reading rate 4/sec. |
|
Meter resolutions |
|
10 mV, 10 mA |
|
Meter accuracies |
|
voltage 0.3% +/- 2 digit. Current 0.6% +/- 2 digit |
|
General Specifications |
|
Cooling |
|
Convection (Fan assisted for XPH 42-10) |
|
Output terminals: |
|
|
|
Standard type |
|
4mm "binding post" terminals suitable for plugs or wires |
|
Optional (all models) |
|
4mm safety sockets, suitable for shrouded plugs |
|
AC input |
|
Factory set: 110 to 120 VAC +/- 10% or 220 - 240 VAC +/- 10%, 50/60 Hz Installation Category ll |
|
Consumption |
|
800 VA |
|
Operating range |
|
5oC to 40oC, 20% to 80% RH |
|
Storage range |
|
-40oC to 70oC |
|
Environmental |
|
Indoor use at altitudes to 2000m, Pollution Degree 2 |
|
Safety |
|
Complies with EN61010-1 |
|
EMC |
|
Complies with EN61326 |
|
Dimensions (HxWxD) |
|
160 x 140 x 320mm |
|
Unit weight |
|
7.9 lbs/3.6 kg |
|
Warranty |
|
3 years |
|
Regulatory Approvals |
|
CE-marked units meet: EN61010-1 and EN 61326 |
|
Note: Specifications subject to change without notice. |
