AMETEK Programmable Power
Programmable Power Products
Elgar, Sorensen and Xantrex Products
Products | Support | Contact Us
Sales Worldwide
DC Products Bench Products AC Products Modular AC / DC Electronic Loads Custome Solutions
Overview Features Specifications Technical Diagrams Downloads Get a Quote  
XPL Series : Specifications
Specifications Available
18-3 30-1 30-2 30-2D 30-2T 56-1  
  Electrical Specifications
  Output voltage   0-30 V
  Output current   0-2 A
  Outputs   2
  Output power   120 W
  Operating mode   Constant voltage or constant current with automatic cross-over and indication
  Voltage setting   By coarse and fine controls
  Current setting   By single logarithmic control
  Line regulation   <0.01% of max. output for a 10% line voltage change
  Load regulation   <0.01% of max. output for a 90% load change
  Output impedance   Typically <5mW in constant voltage mode.
Typically >50kW in constant current mode.
  Ripple and noise (200MHz)   Typically <1mV rms (CV mode)
  Transient response   <20ms to within 50mV of set level for 90% load change
  Temperature coefficient   Typically <100ppm/oC
  Output protection   Outputs will withstand forward voltages of up to 20 V above the rated output voltage. Reverse protection by diode clamp for current up to 3 A
  Status indication   Output ON lamps. Constant current mode lamps
  Output switch   Electronic. Preset voltage and current displayed when output is off
  Output terminals   4mm terminals on 19mm (0.75") pitch
  Meter resolutions   100 mV, 10 mA
  Meter accuracy:    
  Voltage    0.3% +/- 1 digit
  Current   0.6% +/- 1 digit
  General Specifications
  AC input   115 V or 230 VAC +/- 10% (adjustable internally, option HV for factory set 230 VAC input) Installation Category ll
  Power consumption   320 VA
  Operating range   5oC to 40oC, 20% to 80% RH
  Storage range   -40oC to + 70oC
  Environmental   Indoor use at altitudes to 2000m, Pollution Degree 2
  Cooling   Silent fan-less convection cooling
  Safety   Complies with EN61010-1
  EMC    Complies with EN61326
  Dimensions (HxWxD)   6.3 x 10.2 x 11.6"/160 X 260 x 295mm
  Weight   16.5 lb/7.5 kg
  Warranty   3 years
  Regulatory Approvals
  CE-marked units meet: EN61010-1 and EN61326
 
Note: Specifications subject to change without notice.

Investigate our discount web specials
  Product Configurator  
DC Electronic Loads
DC Modular Supply
Discontinued Products
Product Support
Contact Sales

Copyright © 2008 AMETEK Inc. Privacy Phone: 858-450-0085